Videobar VB1

This article describes the process of enabling or disabling the low power mode of the VB1 and VB-S.

This article describes how to check firmware of the Videobar VB1 and VB-S.

This article walks through solutions for computer constantly makes driver installation sound when VB1 is connected.

Learn how to set the Exclusion Zone for Bose Videobars

Videobars can store the camera's pan, tilt, and zoom settings as a recallable preset.

This article describes how to enable the HDMI video out of the VB1 to connect to the display.

Installing the DisplayLink driver required by Videobar VB1

This article describes how to reset a VB1 and restore its default settings.

How to turn AEC on / off for Videobar VB1 and VB-S

Firmware update procedure using Bose Work Configuration and Bose Work Management

What to try if the Videobar VB1 camera does not work properly

Bose Work Configuration can be accessed in a web browser by navigating to the Videobar's IP address.

Choosing the autoframing mode that best suits the needs of the meeting

Utilizing the VB1 Certificate Management feature with BWC and BWM

This Article describes how to use the GP/I for Audio Mute/Unmute.

This Article describes how to Enable the HDMI Output from a VB-1

This Article describes how to turn on the Video Resolution Overlay