You’re offline. This is a read only version of the page.
This article describes the AEC processing object in Bose Conferencing processors, including input and output ports, inside algorithms,
An explanation of the basics behind AEC and why it is important in a conference room.
The control panel for the Acoustic Echo Cancellation (AEC) object allows the user to control and monitor the AEC object.
General guide to AEC processing with EX-1280C, EX-440C, and EX-12AEC using ControlSpace Designer.
In this article, we introduce the AEC Reference block.
Description of each item in the AMM-Gain Sharing control panel.
Chirping or Other Audio Artfacts Heard From ControlSpace Processor
This article contains information about the firmware files that are packaged with each version of ControlSpace Designer software.
This article describes the modes in which PowerMatch, EX and PowerShare devices can be configured.
Programming Philosophy for Open Architecture Digital Signal Processors - Working from the Outside In
How to restore the factory settings from the front panel when the ControlSpace EX processor does not start properly.
How to set the IP address for Dante-enabled devices, including Dante expansion cards and Dante end points
This article explains the main differences between using the Scan and Go Online functions
Two methods for using Wireshark to locate Bose hardware are presented.
This article describes the steps to import Bose Dante firmware files into Audinate's Dante Updater for use in firmware updates.
Resolving Dante firmware update issues when upgrading multiple products
This Article describes how much Serial over IP Connections ar epossible to a ControlSpace ESP/EX or a network Amp
This Arcticle describes how to find the ControlSpace Designer Sample Files at the used PC.
This Article describes how to use the Audio Route Function in the ControlSpace Designer Software